Accumulator – Lamborghini E-Gear
Accumulator – Lamborghini E-Gear
The accumulator is responsible to store the pressure of the hydraulic system for later access by the actuators. The bladder type accumulator has two cells: one cell storing the hydraulic fluid and one cell containing a gas to create counterpressure. Both cells are separated by a membrane. These accumulators have a certain life span and a common defect is that the gas leaks out of the cell, which causes the system to be unable to build up hydraulic pressure. In many of such cases, the pump appears to prime permanently.We offer the brand new original Magneti Marelli spare part.
240,00 
Hydraulic lines – Lamborghini Gallardo E-Gear
Hydraulic lines – Lamborghini Gallardo E-Gear
This is a complete set of brand-new hydraulic lines for the Lamborghini Gallardo (Pre-LP) E-Gear system. Including 5 hydraulic lines for EV1, EV2, EV3, EV4, EV5 and the hose for the oil return.All lines are made in Germany and come with a black protection coating and a felt sleeve covering all lines.
590,00 
Pentosin CHF 11S
Pentosin CHF 11S
Pentosin CHF 11S is a synthetic high performance hydraulic fluid for life-time application in modern vehicle aggregates. Pentosin CHF 11S is especially designed for hydraulics in the automotive industry with the highest technical requirements such as in: power steering, level control, shock absorber, hydro-pneumatic suspension, stability and traction control, hydraulics for convertible tops, central lock systems, etc.It is suitable for all extreme conditions and guarantees full performance from -40 Degree Celsius to over 130 Degree Celsius system temperature.Pentosin CHF 11S meets DIN 51 524T3 and ISO 7308 specification standards.
16,00 
PPV Solenoid Valve – Lamborghini E-Gear
PPV Solenoid Valve – Lamborghini E-Gear
The valve block / power unit of the Lamborghini E-Gear system contains 6 solenoid valves.
  • EVF (QPV) - clutch engagement
  • EV1 (PPV) - gear engagement
  • EV2 (PPV) - gear engagement
  • EV3 (QPV) - gear selection
  • EV4 (QPV) - gear selection
  • EV5 (QPV) - gear selection
Photo for demonstration purpose only. The valve may come without sticker label. Depending from model and year of construction the numbers on the sticker label may vary. In case you are not sure if the part fits your car, please contact us before you buy.
190,00 
Pressure relief valve – Lamborghini E-Gear
Pressure relief valve – Lamborghini E-Gear
The pressure relief valve is responsible to prevent damage to other components due to excess pressure in the hydraulic system. A defective valve would cause pressure loss and frequent pump cycles (similar symptoms as a worn pressure accumulator).
70,00 
Pressure sensor – Lamborghini E-Gear
Pressure sensor – Lamborghini E-Gear
The pressure sensor is responsible to detect the hydraulic pressure in the accumulator of the E-Gear system. This is an original and brandnew spare part.
80,00 
Pump motor – Lamborghini E-Gear
Pump motor – Lamborghini E-Gear
[tabs] [tab title="The problem" start=open] The pump supplies the hydraulic pressure for the different consumers (actuators) of the Lamborghini E-Gear transmission and stores it in the pressure accumulator. The pump consists of a small gear pump and the powering electric motor. Depending on the year of construction, the electric motor used by Lamborghini is a vulnerability and likely to fail due to its location in a high temperature area. [/tab] [tab title="Our motor"] Our motor comes directly from the original equipment manufacturer (OEM) for Lamborghini. Various car manufacturers purchase their parts directly from this supplier. The motor meets highest expectations of quality and enables a sporty style of driving with frequent shifting. [/tab] [tab title="Installation"] The motor can be changed easily as it is only attached by two screws to the pump head. It is not necessary to remove the entire pump but however sometimes helpful. [/tab] [/tabs] Please check the car reference and compare the picture with your part.
270,00 
QPV Solenoid Valve – Lamborghini E-Gear
QPV Solenoid Valve – Lamborghini E-Gear
The valve block / power unit of the Lamborghini E-Gear system contains 6 solenoid valves.
  • EVF (QPV) - clutch engagement
  • EV1 (PPV) - gear engagement
  • EV2 (PPV) - gear engagement
  • EV3 (QPV) - gear selection
  • EV4 (QPV) - gear selection
  • EV5 (QPV) - gear selection
Photo for demonstration purpose only. The valve may come without sticker label. Depending from model and year of construction the numbers on the sticker label may vary. In case you are not sure if the part fits your car, please contact us before you buy.
180,00