Clutch Solenoid Valve – Mercedes Benz Sprintshift / Sequentronic
The clutch solenoid valve (marked with ‘QPV’) is responsible for actuating the clutch in the Sprintshift / Sequentronic system. A faulty valve can cause problems with clutch engagement, such as shuddering, delayed and harsh engagement, or even a complete failure of clutch actuation.
Pentosin CHF 11S
Pentosin CHF 11S is a synthetic high performance hydraulic fluid for life-time application in modern vehicle aggregates. Pentosin CHF 11S is especially designed for hydraulics in the automotive industry with the highest technical requirements such as in: power steering, level control, shock absorber, hydro-pneumatic suspension, stability and traction control, hydraulics for convertible tops, central lock systems, etc.
It is suitable for all extreme conditions and guarantees full performance from -40 Degree Celsius to over 130 Degree Celsius system temperature.
Pentosin CHF 11S meets DIN 51 524T3 and ISO 7308 specification standards.
Pressure Accumulator – Mercedes Benz Sprintshift / Sequentronic
Our refurbished pressure accumulators are equipped with a filling valve and freshly filled with nitrogen gas.
The accumulator is responsible to store the pressure of the hydraulic system for later access by the actuators. The piston type accumulator has two cells: one cell storing the hydraulic fluid and one cell containing a gas to create counterpressure. Both cells are separated by a moving piston. A broken accumulator causes the pump to prime more often.
Important: You will need to pay a core charge (deposit) of 300,00€ which will be refunded when you return your used part. You can learn more here. This is a repair service (no purchase of a product). Our terms and conditions and the right of withdrawal for the order of services apply.
Pressure Sensor – Mercedes Benz Sprintshift / Sequentronic
The pressure sensor is responsible to detect the hydraulic pressure in the accumulator of the Sprintshift / Sequentronic system. This is an original and brandnew spare part.
Pump Motor – Mercedes Benz Sprintshift / Sequentronic
The pump motor drives the gear pump, which generates the pressure for the Sprintshift / Sequentronic transmission. Both parts together form the hydraulic pump. Without hydraulic pressure, the transmission cannot perform any action – neither change gears, nor operate the clutch. Therefore, the hydraulic pump is the most important component in the system.
In most cases, it is sufficient to replace only the electric motor, as this is a wearing part. The gear pump fails only very rarely. Another advantage is that when only the pump motor is changed, the hydraulic system does not need to be bled afterwards, unless it has been opened.
We sell an original, brand new Magneti Marelli spare part – the same part you would get from Merceds Benz.
Pump Relay – Mercedes Benz Sprintshift / Sequentronic
The electromagnetic relay is responsible to turn on / off the hydraulic pump of the Mercedes Benz Sprintshift / Sequentronic system. A broken relay causes the pump to fail priming. Without hydraulic pressure, the system cannot engage the gears or clutch.
This is not an original part, but an OE part.
Selection Solenoid Valve – Mercedes Benz Sprintshift / Sequentronic
The selection solenoid valve (marked ‘OOV’) is responsible for moving the gear selector sideways to select gear pairs. If this two-way on/off valve fails, the car may be unable to engage one or more gears. Note: the product photo is for illustrative purposes only, the valve is supplied without the Magneti Marelli sticker.
Shift Solenoid Valve – Mercedes Benz Sprintshift / Sequentronic
The shift solenoid valves (marked ‘PPV’) are responsible for engaging the gears in the Sprintshift / Sequentronic gearbox. There are two of these pressure-proportional valves mounted on the hydraulic unit. Working in conjunction with the selection valve, they operate the shift actuator. If either valve is faulty, the car may be unable to engage one or more gears.
Solenoid Valve Seal Kit – Mercedes Benz Sprintshift / Sequentronic
- Seal kit for the solenoid valves
- Includes seals for all four valves
- Solution to eliminate internal leaks
Transmission Speed Sensor – Mercedes Benz Sprintshift / Sequentronic
This sensor provides the speed signal of the transmission input shaft. The speed signal is required by the control unit to control the transmission system, adjusting properly the shaft speeds before engaging and disengaging the different gears.