Oil Filter – Peugeot 4007 Citroen C-Crosser DCS 6
The filter removes contaminants from the transmission oil. Since the transmission uses the same oil circuit for lubricating the gears, the clutches, and also the mechatronics, the level of contamination is significantly higher in this case. Regular filter replacement is therefore very important, as contamination in the oil can quickly clog or damage sensitive components of the mechatronics. Our set includes the filter, a sealing ring, and the filter housing.
Pressure Sensor – Peugeot 4007 Citroen C-Crosser DCS 6
This sensor is used in the DCS 6 transmission to measure hydraulic pressure at the clutches; two are installed per gearbox. It sends real-time pressure data to the transmission control unit to ensure smooth gear shifts and optimal clutch operation. If the sensor is faulty, symptoms may include harsh or delayed shifting, gear slipping, warning lights, stored fault codes, or activation of limp mode.
Solenoid Valve Kit – Peugeot 4007 Citroen C-Crosser DCS 6
This set includes all new solenoid valves of the transmission as brand-new, original spare parts. It is ideally suited as a repair solution in cases where it is not clear which solenoid valve is causing the problem, or as a component of a complete transmission overhaul.
Transmission Speed Sensor – Peugeot 4007 Citroen C-Crosser DCS 6
This sensor provides the speed signal of the transmission input shaft. The speed signal is required by the control unit to control the transmission system, adjusting properly the shaft speeds before engaging and disengaging the different gears.