Clutch valve – Aston Martin Vantage Sportshift
Clutch valve – Aston Martin Vantage Sportshift

The clutch solenoid valve (marked with “QPV”) is responsible for the clutch actuation of the Sportshift system. A faulty valve can cause problems while engaging the clutch (for example shuttering) and in consequence the car refuses to change gears.

This is an original and new Magneti Marelli spare part. The part fits all Aston Martin Sportshift systems (I, II and III).

230,00 
Pressure accumulator – Aston Martin Vantage Sportshift
Pressure accumulator – Aston Martin Vantage Sportshift

Our refurbished pressure accumulators are equipped with a filling valve and freshly filled with nitrogen gas.

The accumulator is responsible to store the pressure of the hydraulic system for later access by the actuators. The piston type accumulator has two cells: one cell storing the hydraulic fluid and one cell containing a gas to create counterpressure. Both cells are separated by a moving piston. A broken accumulator causes the pump to prime more often.

The part fits all Aston Martin Sportshift systems (I, II and III).

Important: You will need to pay a core charge (deposit) of 300,00€ which will be refunded when you return your used part. You can learn more here. This is a repair service (no purchase of a product). Our terms and conditions and the right of withdrawal for the order of services apply.

290,00 
Pressure sensor – Aston Martin Vantage Sportshift
Pressure sensor – Aston Martin Vantage Sportshift

The pressure sensor is responsible to measure the hydraulic pressure in the accumulator of the Sportshift system. The part fits all Aston Martin Sportshift systems (I, II and III).

80,00 
Pump motor – Aston Martin Vantage Sportshift
Pump motor – Aston Martin Vantage Sportshift

New Aston Martin Vantage Sportshift pump motor

  • Original Magneti Marelli spare part
  • “Plug & Play” installation
  • Fits all Aston Martin Sportshift systems (I, II and III)

The pump supplies the hydraulic pressure for the different consumers (actuators) of the Sportshift system system and stores it in the pressure accumulator. The pump consists of a small gear pump and an electric motor. If the pump motor fails, the Sportshift cannot perform clutch operations or gear changes due to the lack of pressure.

270,00 
Selection valve – Aston Martin Vantage Sportshift
Selection valve – Aston Martin Vantage Sportshift

The selection solenoid valve (marked with “OOV”) is responsible to move the gear selector sideways to select the gear pairs. In the case of failure of this valve, the car will refuse to go into one or more gears.

This is an original and new Magneti Marelli spare part. The part fits all Aston Martin Sportshift systems (I, II and III).

160,00 
Service Kit Hydraulic Pump – Aston Martin Vantage Sportshift
Service Kit Hydraulic Pump – Aston Martin Vantage Sportshift

The service kit includes the plastic coupling, which connects the shaft of the gear pump with the shaft of the electric motor, as well as seals.

18,00 
Shift valve – Aston Martin Vantage Sportshift
Shift valve – Aston Martin Vantage Sportshift

The shift solenoid valves (marked with “PPV”) are responsible for changing the gears of the Sportshift system. There are two of these valves on the hydraulic unit. Together with the selection valve, they operate the shift actuator. If one of the valves is faulty, the car will refuse to go into one or more gears.

This is an original and new Magneti Marelli spare part. The part fits all Aston Martin Sportshift systems (I, II and III).

230,00 
Transmission speed sensor – Aston Martin Vantage Sportshift
Transmission speed sensor – Aston Martin Vantage Sportshift

This sensor provides the speed signal of the transmission input shaft. The speed signal is required by the control unit to control the transmission system, adjusting properly the shaft speeds before engaging and disengaging the different gears.

15,00