EV0 Clutch Solenoid Valve – Fiat Dualogic / Selespeed
The EV0 Solenoid Valve is responsible for the clutch actuation of the Selespeed system. A faulty EV0 can cause problems while engaging the clutch (for example shuttering) and in consequence the car refuses to change gears.
We sell an original Magneti Marelli spare part. Depending from model and year of construction the numbers on the sticker label may vary. In case you are not sure if the part fits your car, please contact us before you buy.
EV1 / EV2 Engagement Solenoid Valve – Fiat Dualogic / Selespeed
The Engagement Solenoid Valves are responsible to engage the gears of the Dualogic / Selespeed system. In the case of failure of this valve, the car will refuse to go into one or more gears.
Pressure sensor – Fiat Dualogic / Selespeed
The pressure sensor is responsible to detect the hydraulic pressure in the accumulator of the Dualogic / Selespeed system. This is an original and brandnew spare part.
Selection / Clutch Sensor – Fiat Dualogic / Selespeed
The Dualogic / Selespeed selection and engagement position sensors (Potentiometers) are responsible to detect the current state of the gear engagement. The clutch sensor is responsible to detect the state of the clutch. There are three of these sensors installed on the Dualogic / Selespeed unit. A faulty sensor can prevent the car to engage gears or shift.
We sell an original spare part from Magneti Marelli.
Transmission speed sensor – Fiat Dualogic / Selespeed
This sensor provides the speed signal of the transmission input shaft. The speed signal is required by the control unit to control the transmission system, adjusting properly the shaft speeds before engaging and disengaging the different gears.